Electrostatic Powder Coating
With our 6.30 m² paint shop we powder coat your metal parts on a contract basis.
Parts we powder coat
Steel profiles, tube and sheet
A long-lasting finish for structures, railings and fabricated parts.
Aluminium profiles, tube and sheet
Joinery, façade and decorative aluminium parts.
Metal tables and chairs
Table legs, seating and metal furniture.
Lift doors and frames
An even, hard-wearing finish for car and landing doors.
Steel doors and frames
Colour that stands up to knocks and scratches.
Automotive supplier parts
Corrosion protection for brackets, guards and chassis parts.
What is electrostatic powder coating?
Powder coating is a dry, fine powder applied to a metal surface and baked in an oven into a tough, decorative finish. It contains no solvents.
- 01
Surface preparation
The part is cleaned of oil, dirt and rust: adhesion depends on it.
- 02
Electrostatic spraying
The gun charges the powder particles; the earthed part pulls the powder evenly onto every face.
- 03
Curing
The part is baked at about 200 °C; the powder melts, flows and cross-links into one solid film.
- 04
Cooling and inspection
Once cool, colour, surface and coating thickness are checked.
Why powder coating?
- Durable: a thicker, harder film than wet paint, resisting impact, scratches and corrosion.
- Cleaner: no solvents, and overspray powder can be collected and reused.
- Wide colour range: matt, satin and gloss finishes from the RAL chart.
- Even finish: a uniform, run-free coat in a single pass.
Powder coating questions
Quick quote
Send your drawing by e-mail or WhatsApp and we will come back quickly with material, quantity and lead time.
Which colours can you coat in?
We apply matt, satin and gloss finishes in the colours of the RAL chart. Give the RAL code you need in your quote request.
Which parts do you coat?
Steel and aluminium profiles, tube and sheet; metal tables and chairs; lift and steel doors; automotive supplier parts.
Why does powder coating last longer than wet paint?
The powder is baked at about 200 °C into one solid film that is thicker and harder than wet paint, so it resists impact, scratches and corrosion.
What should I tell you for a coating quote?
The part type, its dimensions, the quantity and the RAL colour you need.
Other services
Get a quote for your coating job
Tell us the part type, dimensions, quantity and the RAL colour you need.
